Google+

INSPIRA® Dissolve-A-Way Max Stabilizer

INSPIRA® Dissolve-A-Way Max is the heaviest weight water soluble film. It is the ideal backing for dense designs and heavier thread weights stitched on heavy knits, like Ponté knit. It is great for embroidery projects like lace, 3D appliqué, cutwork, embroidery on towels and other applications where it is desirable for the stabilizer to be removed completely. INSPIRA® Dissolve-A-Way Max stabilizer can be used as topper for medium weight, coarsely woven fabrics, like duck cloth, to prevent the stitches from being distorted by the weave.
 
Sizes available:
Dissolve-A-Way Max, 12” x 10 yards (620113796) 
 
Best for these applications:
• Lace, 3D appliqué, cutwork, Richelieu, decorative stitch borders.
• Medium to heavy weight wovens and knits, such as Ponté knit, duck cloth, heavy canvas and thick towels/terry cloth.
Directions for use:
 

Other information

Directions for use:
• Cut a piece of INSPIRA® Dissolve-A-Way Max stabilizer large enough for the selected hoop (hoop dimension plus at least 1” on all four sides).
For free-standing appliqué:
• Hoop INSPIRA® Dissolve-A-Way Max stabilizer only, making sure it is taut in the hoop. Additional layers may be required for dense embroidery designs or heavier weight thread. Note: Check embroidery design instructions to be sure that design was digitized to be free-standing.
• When the embroidery is completed, cut away the excess stabilizer. Submerge the embroidery in warm to hot water. Move the embroidery continuously and keep submerged in the water bath for at least 10 minutes.
• Rinse thoroughly with very warm water. Repeat the process as needed until all remaining stabilizer is completely dissolved.
• Place the embroidery work on a flat surface until dry. Press with a warm iron using a pressing cloth.
For use as a topper:
• Hoop the fabric to be embroidered with appropriate backing stabilizer.
• Place the INSPIRA® Dissolve-A-Way Max stabilizer on top of the hooped fabric. Baste in place.
• Embroider the design.
• When the embroidery is completed, carefully pull away the excess stabilizer. Any remaining areas can be removed by blotting with a moist sponge or spritz with water. Larger areas are easily removed during laundering.
• Place item on flat surface until thoroughly dry.
 

image description

Make magic, easier.

Browse our complete accessory catalogue to find just the right prop.

Browse